CWT (HK) Co., Limited
gsm home alarm,GPRS data logger,GSM SMS Controller,Modbus RTU,gsm gate opener
Add to Cart
wireless 4g gsm RTU data logger for sms remote control system
Support 3G WCDMA / 4G LTE Version
E-mail: lisa(at)mobq2000.com
Skype:lisali1220
WhatsApp: 0086 -13652426178
Mobile:00 86 13652426178
QQ : 2946370755
CWT5002-2 MODBUS GPRS Terminal enables various kinds of devices with I/O and AD and Standard MODBUS protocols to communicate over GSM/GPRS network and the Internet easily and freely. It can construct a smooth “GPRS Data Tunnel” between Host End and Remote End, ensuring an efficient communication for data transmission and remote device management. It also support send user-defined alarm sms when pre-defined alarm condition happens, and can be controlled via SMS command.
With 8 Digital Inputs, 8 drivable Outputs, 4 analog inputs and 1 selectable RS-232/485 serial port connect slave to read and writer 32 registers, CWT5002-1 is an ideal solution for factory automation, environmental monitoring and remote device management for M2M industry.
DC Power supply: 12-24V DC (Standard adapter: DC 12V/1.5A)
Power consumption: 12V input Max. 150mA/Average 50mA
Frequency range: Quad-frequency 900/1800/850/1900HMz
SIM Card: Supporting 3V SIM Card
Antenna: 50 Ω SMA Antenna interface
Serial port: Selectable RS-232/485
Temperature range: -30°C ~ +70 °C
Humidity range: Relative humidity 95%
Digital Input: 4 digital inputs (Dry contact)
Output: 4 drivable relay outputs (open-collector outputs)
Output drive voltage: Equal to input DC voltage
Output drive power: Drive voltage ≤35V, drive current ≤500mA
Exterior dimension: 95×63×25mm
Weight: 256 g
