CWT (HK) Co., Limited
gsm home alarm,GPRS data logger,GSM SMS Controller,Modbus RTU,gsm gate opener
Add to Cart
GPRS GSM Modbus Protocol Data Logger, RS485/RS232, Modbus Master/Slave
Support 3G WCDMA / 4G LTE Version
E-mail: lisa(at)mobq2000.com
Skype:lisali1220
WhatsApp: 0086 -13652426178
Mobile:00 86 13652426178
QQ : 2946370755
CWT5002-2 MODBUS GPRS Terminal enables various kinds of devices with I/O and AD and Standard MODBUS protocols to communicate over GSM/GPRS network and the Internet easily and freely. It can construct a smooth “GPRS Data Tunnel” between Host End and Remote End, ensuring an efficient communication for data transmission and remote device management. It also support send user-defined alarm sms when pre-defined alarm condition happens, and can be controlled via SMS command.
With 8 Digital Inputs, 8 drivable Outputs, 4 analog inputs and 1 selectable RS-232/485 serial port connect slave to read and writer 32 registers, CWT5002-1 is an ideal solution for factory automation, environmental monitoring and remote device management for M2M industry.
DC Power supply: 12-24V DC (Standard adapter: DC 12V/1.5A)
Power consumption: 12V input Max. 150mA/Average 50mA
Frequency range: Quad-frequency 900/1800/850/1900HMz
SIM Card: Supporting 3V SIM Card
Antenna: 50 Ω SMA Antenna interface
Serial port: Selectable RS-232/485
Temperature range: -30°C ~ +70 °C
Humidity range: Relative humidity 95%
Digital Input: 4 digital inputs (Dry contact)
Output: 4 drivable relay outputs (open-collector outputs)
Output drive voltage: Equal to input DC voltage
Output drive power: Drive voltage ≤35V, drive current ≤500mA
Exterior dimension: 95×63×25mm
Weight: 256 g
